Hydrocylinders

Standard hydrocylinders

CD16 (nominal pressure: 160 bar / Working conditions: LIGHT)
CDS1 (nominal pressure: 160 bar / Working conditions: MIDDLE / uso 6020/1)
CDV1 (nominal pressure: 250 bar / Working conditions: MIDDLE to HEAVY / uso 3320)
CDV2 (nominal pressure: 250 bar / Working conditions: HEAVY / uso 6022)
CDV3 (nominal pressure: 350 bar / Working conditions: EXTREME HEAVY/ (iso 3320)

Special designed hydrocylinders

We also produce special designed hydrocylinders which are built according to customer desmands and take the very specific use and working conditions of the respective line of business into account.

Hydrocylinder for iron works

Piston diameter: 440 mm
Piston rod diameter: 380 mm
Nominal pressure: 350 bar
Mass: ~4.000 kg

Hydrocylinder for iron works with hydraulic block

Piston diameter: 600 mm
Piston rod diameter: 380 mm
Nominal pressure: 250 bar
Mass: ~6.000 kg

“AGC” Hydrocylinder for iron works – hot strip mill

Piston diameter: 1300 mm
Piston rod diameter: 1150 mm
Mass: ~16.000 kg

Hydrocylinder for iron works

Piston diameter: 2 x 250 mm
Mass: ~4.000 kg

Hydrocylinder for water power plants

Piston diameter: 400 mm
Piston rod diameter: 250 mm
Mass: ~4.000 kg

Hydrocylinder for water power plants with locking device

Piston diameter: 500 mm
Piston rod diameter: 180 mm
Mass: ~5.000 kg

Hydrocylinder for presses

Piston diameter: 550 mm
Nominal pressure: 320 bar
Amount: 24 pcs / press

Piston diameter (mm):
25 32 36 40 50 60 63 70 80 90 100 110 125 140 150 160 180 200 220 250 280 300 320 350 360 400 450 500 630 700 800 900 1000 1100 1250 1400 1500

Piston rod diameter (mm):
121618 20 22 25 28 30 32 36 40 45 50 56 63 70 80 90 100 110 125 140 150 160 180 200 220 250 280 300 320 360 380 400 450 500 630 700 800 900 1000 1100 1250

Production process:

  • Material and production acc. to drawing and enclosed technical specification
  • Seals: Viton, Simrit – Merkel
  • Hydrocylinder assembling
  • Controls: measurements, test pressure (375 bar), tightness test acc. to technical specification
  • Marking
  • Coat of paint
  • Inspection certifificate EN 10204-3.1.C / DIN 50049-3.1.C